Whatsapp/Wechat：+8613586193125 Email:sales@hgtools.cn
Leave for: 中文版
Hydraulic punching machine use
Connect the oil pump and working head with quick coupling.
Release time:
2025-02-06
1、Connect the oil pump and working head with quick coupling.
2、Choose the corresponding upper and lower molds, first install the upper mold after installing the lower mold, when installing the upper mold, first screw out the positioning screws in a certain position before installing the lower mold, be sure to put into position, and then tighten the positioning screws to work.
3, put the workpiece, close the oil pump back to the oil screws, plate handle, until the work is completed to loosen the oil screws, such as punching the thinner sheet metal must be inserted into the withdrawal pads withdrawal tripod and the middle of the workpiece, otherwise the workpiece will be stuck in the mold.
Related News
Hydraulic punching machine use
Connect the oil pump and working head with quick coupling.
2025-02-06
Hydraulic punching machine mold replacement method
The lower mold has a typing side facing up and not facing down.
2025-02-06
Construction of hydraulic jacks
Hydraulic jack consists of oil pump, relief valve, high-pressure cylinder and base.
2025-02-06
The role of the main components of the busbar processing machine
Usually hydraulic oil can be checked by observation and testing.
2025-02-06
How to store hydraulic jacks after use
When using the manual pump, first the quick connector and the top butt
2025-02-06