Whatsapp/Wechat：+8613586193125 Email:sales@hgtools.cn
Leave for: 中文版
Hydraulic punching machine mold replacement method
The lower mold has a typing side facing up and not facing down.
Release time:
2025-02-06
1, the upper mold replacement method: use (black) elastic screwdriver to loosen the upper mold (silver-white) fixing bolts to the left, slowly remove the upper mold, replace the required upper mold, and tighten the upper mold fixing bolts to the right with the elastic screwdriver to tighten the upper mold.
2, the lower mold replacement method: the use of small hexagonal wrenches to fix the lower mold to loosen the screw to the left, and then from the bottom of the lower mold, fingers or small tools from the bottom up to the lower mold top out, replace the upper mold with the matching lower mold, with a small wrench to tighten can be.
Note:
1、The lower mold has a typing side facing up and not facing down.
2、When replacing the mold, remove the upper mold first in order to replace the lower mold.
Related News
Hydraulic punching machine use
Connect the oil pump and working head with quick coupling.
2025-02-06
Hydraulic punching machine mold replacement method
The lower mold has a typing side facing up and not facing down.
2025-02-06
Construction of hydraulic jacks
Hydraulic jack consists of oil pump, relief valve, high-pressure cylinder and base.
2025-02-06
The role of the main components of the busbar processing machine
Usually hydraulic oil can be checked by observation and testing.
2025-02-06
How to store hydraulic jacks after use
When using the manual pump, first the quick connector and the top butt
2025-02-06