How to store hydraulic jacks after use

When using the manual pump, first the quick connector and the top butt


Release time:

2025-02-06

1、When using the manual pump, first the quick connector and the top butt, and then choose a good position, the oil pump on the oil drain screw screw tightened, you can work. To make the piston rod down, the manual oil pump handwheel according to the counterclockwise direction slightly loosened, the cylinder unloading, the piston rod is gradually down. Otherwise, the decline rate is too fast will produce danger.

2, because the hydraulic jack lifting stroke is small, the user must not exceed the rated stroke, so as not to damage the jack.

3, such as the need for several hydraulic jacks lifting at the same time, in addition to the correct placement of the jack, should use a multi-top shunt valve, and each jack load should be balanced, pay attention to keep the lifting speed synchronized. Must also consider the uneven weight of the ground may be subsidence, to prevent the lifted object to produce tilt and danger.

4, the hydraulic jack is a spring reset structure, after lifting, you can quickly remove, but not with the connected hose to pull the jack.

Related News

Hydraulic punching machine use

Connect the oil pump and working head with quick coupling.

2025-02-06

Hydraulic punching machine mold replacement method

The lower mold has a typing side facing up and not facing down.

2025-02-06

Construction of hydraulic jacks

Hydraulic jack consists of oil pump, relief valve, high-pressure cylinder and base.

2025-02-06

The role of the main components of the busbar processing machine

Usually hydraulic oil can be checked by observation and testing.

2025-02-06

Jack reset procedure

When the red line of the jack is higher than the standard range

2025-02-06

How to store hydraulic jacks after use

When using the manual pump, first the quick connector and the top butt

2025-02-06