Whatsapp/Wechat：+8613586193125 Email:sales@hgtools.cn
Leave for: 中文版
Hydraulic crimping pliers use precautions
Please do not put your hand on the pressure head when using.
Release time:
2025-02-06
1, hydraulic pliers are not insulated, when used near power lines, be sure to use non-conductive tubing and be prepared for personal protection.
2, hydraulic clamp hydraulic oil under high pressure can easily pierce the skin, causing serious injury, decay or even death, if you are leaking hydraulic oil to get hurt, please see a doctor immediately.
3, do not use your hands to check for oil leaks, when the hydraulic system is pressurized, do not use your hands to touch the tubing and fittings, and be sure to back off the pressure before servicing.
4, when operating and overhauling must wear eye protection to avoid flying debris or hydraulic oil causing serious eye injuries.
5, please do not put your hand on the pressure head when using.
6、When using, pay attention to the mold, connecting pipe and cable matching, otherwise it will lead to incomplete crimping.
7、Depressurization is fully completed when the sound of the depressurization valve is heard.
Related News
Hydraulic punching machine use
Connect the oil pump and working head with quick coupling.
2025-02-06
Hydraulic punching machine mold replacement method
The lower mold has a typing side facing up and not facing down.
2025-02-06
Construction of hydraulic jacks
Hydraulic jack consists of oil pump, relief valve, high-pressure cylinder and base.
2025-02-06
The role of the main components of the busbar processing machine
Usually hydraulic oil can be checked by observation and testing.
2025-02-06
How to store hydraulic jacks after use
When using the manual pump, first the quick connector and the top butt
2025-02-06